Windshield Electrostatic Sunshade Strip (Self-Cut)
Regular price
$298
Sale price
$298
Regular price
Unit price
This product is a static cling film with a relatively soft texture. Please pay special attention to the operating method and tool control when cutting, and confirm the dimensions.
22 people are currently viewing this product
-
Estimated ship date after order is placed:Sep 20 - Sep 24
-
Notes on ordering: This product is a soft electrostatic film. Please pay special attention to the operating method and tool control when cutting, and confirm the dimensions. Damage caused by cutting or installation errors will not be accepted for returns or exchanges.
⚠️ **｜購買前請特別留意｜**
本產品為 DIY 可重複撕貼式靜電隔熱紙，自己就能貼、隨時可以撕下，與專業施工隔熱紙的產品定位不同。
以更輕鬆、經濟的方式升級車窗隔熱與隱私效果。
因此，在 **完工細緻度、視野清晰度 **，與專業施工隔熱紙會有所不同，請勿以專業隔熱紙施工成品的標準衡量。
👇如果您更在意高清視野、完美服貼與專業施工品質，歡迎直接聯繫我們。👇 提供 車型＋所在地區＋預算需求，我們就能立即協助您更專業的隔熱解決方案。
**下單前請確認已了解並可接受上述產品特性，再進行購買，謝謝您的理解！**
Windshield Electrostatic Sunshade Strip (Self-Cut)
To avoid the risk of self-trimming, you can refer to and purchase pre-trimmed products.
Car Life Electrostatic Sunshade Strips
"Fill in the gap" for your 70% front windshield tint.
Precise Sun Protection
Specifically designed for the top edge of the windshield, preventing glare from sunsets and midday sun
from directly hitting your eyes.
Heat Insulation Boost
Directly overlaying existing tint film to enhance the insulation effect of high-transparency tint film.
Peel and stick anytime
No adhesive, reusable, does not damage glass, a good solution for inspections and audits.
Choose the Best Light Sensitivity for You
Thermal Insulation Data
VLT Visible Light Transmittance 5%
UVR Ultraviolet Rejection 98%
IRR Infrared Rejection 67%
Thermal insulation data
VLT (Visible Light Transmittance) 20%
UVR (Ultraviolet Rejection) 96%
IRR (Infrared Rejection) 55%
Construction Method
Separate static insulation film from release paper
Separate the anti-static thermal insulation film from the white release paper.
Please keep the white release paper, as it will be used later as a cutting template (pattern making).
Soak the insulation film to prevent sticking.
After separation, please fully immerse the static cling insulation film in clean water.
This can effectively reduce static electricity and prevent the film from sticking during the cutting process.
Locate and draw the car model (make a template).
Lay the white insulating paper on the outside of the vehicle's front windshield, and use masking tape to secure it in place, ensuring the paper is flat and does not shift.
Roughly cut the separating paper according to the template.
Along the top edge and side frames of the front windshield, trace the outline of the glass on the separating paper, and accurately mark the position of the rearview mirror base in the center.
Interior trim tailored for a perfect fit
Following the outline, roughly cut the white paper.
Depending on the vehicle model, the edges may be cut slightly larger. It is recommended to keep the excess edges for fine-tuning later when moving to the car's windshield.
Cut the electrostatic insulation film according to the template.
Position the paper template on the front windshield inside the car. Check how well the edges fit. Mark and trim any excess or corner areas until the template perfectly matches the car window's contour.
Cut the electrostatic insulation film according to the template.
Take the electrostatic insulation film out of the water, lay it flat, and wipe off the surface moisture.
Place the trimmed paper template underneath the insulation film.
Cut precisely along the edge of the template to create a custom-sized electrostatic sunshade and insulation film.
After cutting, it's ready to be applied to the front windshield.
Clean the glass surface to be adhered.
Spray water on the electrostatic thermal insulation film and then apply it.
Use a squeegee to remove water and air bubbles, making the film smooth and flat.
For a practical demonstration, 👉🏻(Installation Tutorial Video)
Worried about cutting it yourself?
You can choose from the following items:
Electrostatic Sunshade Strip for Car Windshields
Customized cutting for different car models, perfectly fitted.
You might also like
DIY No-Drill "SUV Models" | Electrostatic Heat-Insulating Film | 100% Success Rate
Regular price
$500
Sale price
$500
Regular price
$500
Unit price
DIY No-Drill | Static Cling Heat Insulation Film "Sedan Model"
Regular price
$500
Sale price
$500
Regular price
$500
Unit price
Tesla Model Y DIY No Installation Required | Order Page | Static Cling Tint Film
Regular price
$500
Sale price
$500
Regular price
$625
Unit price
